No more bulky bags to handle! This is a salt-free system that eliminates chlorine with carbon filtration. In conjunction with our portable exchange tanks it also eliminates calcium, magnesium and hard water. This water improvement system environmentaly friendly and virtually maintenance free! Learn More
Available for rent or purchase. Reverse Osmosis removes many types of large molecules and ions from solutions. All units come standard with a leak controller and hot/cold options are available. Learn More
All the benefits of Reverse Osmosis with added alkalinity. Reverse Osmosis can leave water slightly acidic and alkalinity can have many health benefits. All units come standard with a leak controller Learn More
Efficient and affordable - RF Series Water Softeners feature a dependable industry proven control valve costing about 10 cents per month to operate. This unit will leave your customers with cleaner clothes, softer skin and sparkling glassware. Learn More
The Eliminator B100 is a device that wraps around your main water pipe and plugs into an electrical outlet. Using multi-vibration frequency, the water is treated as it passes through the pipe. The multi-vibration frequency treats the water in three ways:
1. Calcium carbonate molecules are converted to calcium bicarbonate. The process suspends the calcium and magnesium, helping to reduce scale formation and other deposits. This change aids in dissolving calcium and other hard water elements from pipes and all water using equipment.
2. Secondly, the water becomes slightly ionized which suspends the calcium and magnesium helping to reduce scale formation and other deposits.
3. Nucleation occurs in the water, preventing the calcium carbonate from adhering to surfaces. The release of Carbon Dioxide and Hydrogen from the frequency treatment causes the calcium carbonate to crystallize aragonite.
4. Utilizing the Eliminator B100 Salft Free Water System in combination with out portable exchange tank service eliminates the need for big annoying bags of salt and the traditional salt or potassium water softener.
Although it is not typical, results can be seen in as little as five days! Hard water build-up takes place over time, and while immediately after hooking up your new Arizona Water Conditioning Eliminator B100 system better, cleaner, chlorine-free water is flowing it may take time to significantly effect that build-up. Typically, significant results are seen within 45 days.
We deploy the most advanced manufacturing tools, processes and components to provide you the best drinking water system available in Arizona. Our drinking water systems are built in our Mesa, Arizona factory for the extreme Arizona water. The people who build your unit will be the same people who install this equipment and provide you yearly service. This equipment must be maintained and sanitized yearly to maintain an A+ result. We test all of our equipment for 16 hours before we perform the installation.
Reverse Osmosis (RO) is a method that removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solution is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be “selective,” this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely.
In the normal osmosis process, the solvent naturally moves from an area of low solute concentration (High Water Potential), through a membrane, to an area of high solute concentration (Low Water Potential). The predominant removal mechanism in membrane filtration is straining, or size exclusion, so the process can theoretically achieve perfect exclusion of particles regardless of operational parameters such as influent pressure and concentration.
Osmosis is a natural process. When two liquids of different concentration are separated by a semi permeable membrane, the fluid has a tendency to move from low to high solute concentrations for chemical potential equilibrium.
In reverse osmosis, in a similar setup as that in osmosis, pressure is applied to the compartment with high concentration. In this case, there are two forces influencing the movement of water: the pressure caused by the difference in solute concentration between the two compartments (the osmotic pressure) and the externally applied pressure.
The membranes used for reverse osmosis have a dense layer in the polymer matrix where most separation occurs. In most cases, the membrane is designed to allow only water to pass through this dense layer, while preventing the passage of solutes (such as salt ions). This process requires that a high pressure be exerted on the high concentration side of the membrane, natural osmotic pressure that must be overcome. This process is best known for its use in desalination (removing the salt and other minerals from sea water to get fresh water, but since the early 1970s it has also been used to purify fresh water for medical, industrial, and domestic applications.
The reverse osmosis process leaves the water slightly acidic (the reverse osmosis process leaves the water at 6 Ph; non acidic water is 7 Ph and above). We have invented a technique to raise the Ph of our water between 8 and 8.5 Ph. Simultaneously we are adding a slight amount of alkalinity to the water. This process is called: Boyett Family Alkalinity Reverse Osmosis Process. This process is available to you in the form of a different system.
All Tubing, All Fittings, Filter Housings, Automatic shut off valve, drain control, storage tank, check valve, membrane housing, sediment filter, carbon block filter, in line carbon filter.
Founded in 1944, NSF International is committed to protecting and improving human health on a global scale. NSF International is an independent, not-forprofit organization that provides standards development, product certification, auditing, education and risk management for public health and the environment. Manufacturers, regulators and consumers alike look to NSF International for the development of public health standards and certification that help protect the world’s food, water, health and consumer products.
A client came into our office and requested that we provide her a drinking water unit which will create alkalinity water. Marina did not want to pay $4,000 for the alkalinity unit that is available on the market. Our R&D department went to work and invented this alkalinity concept. Our Concept is based upon germane and effective water treatment technologies.
The reverse osmosis process leaves the water slightly acidic (the reverse osmosis process leaves water at 6 Ph; non acidic water is 7Ph and above). We have invented a technique to raise the Ph of our water between 8 and 8.5 Ph. Simultaneously we are adding a slight amount of alkalinity to the water.
Based upon our research, there are many health advantages and medical evidence as to the efficacy of drinking water of a higher Ph (based upon our research 8.5 Ph is optimal). There is also much information that discusses the health benefits of drinking water which contains a high amount of alkalinity.
If you drink 64 ounces of our alkalinity reverse osmosis water daily; this may equal 10% of your recommended calcium intake (tests performed at Legend Laboratories Phoenix, Arizona - click here to view
Rayne RF Series Water Softeners feature a dependable industry proven control valve, costing about 10 cents per month to operate.
With the water meter, which monitors water usage and initiates regeneration only on demand, you'll eliminate unnecessary regenerations saving salt and water.
Since 1982 Rayne Dealers have been solving water problems with state-of-the-art equipment. As a Rayne customer you'll feel confident with their expertise, reliability and superior service.
